1050 has excellent processability and surface treatability, the most corrosion resistant of all aluminum alloys.5052 is a medium strength alloy, good corrosion resistance and formability, high fatigue strength, normally used for meter display panels, AT drums, air bag inflators, covers etc....
1050 has excellent processability and surface treatability, the most corrosion resistant of all aluminum alloys.
5052 is a medium strength alloy, good corrosion resistance and formability, high fatigue strength, normally used for meter display panels, AT drums, air bag inflators, covers etc.
Alloy: 1050 single side clad 5052
Temper: H32
Thickness: 1--5mm
Width: 1100--2500mm
Product characteristics:
- Light weight
- Excellent machinability and weldability
- Good corrosion resistance and stable mechanical properties
- Metallurgic combination between 1050 and 5052
|
Alloy |
Temper |
Tensile strength(MPa) |
Yield strength (MPa) |
Elongation A50 % |
|
1050/5052 |
H32 |
200--260 |
≥130 |
≥7 |
|
Clad rate(%) |
Clad rate deviation(%) |
|
5--6 |
+/-1.0 |
|
>6--8 |
+/-1.5 |
|
>8--12 |
+/-2.0 |
|
>12--18 |
+/-3.0 |
